9F.-7, No.75, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City, Taiwan

Tel: +886-2-2698-8618

Fax: +886-2698-8610

Please reload

  • Facebook Clean
  • White LinkedIn Icon


© 2015 by Digipower Manufacturing Inc.

Digipower Manufacturing Inc.


Intelligent Power Panel - Power Meter via Modbus


IPP series is a single/three phase remotely monitored power meter, built-in 12 independent measurement modules. User may select any one phase of the input voltage as a measurement reference. It supports the monitoring of twelve loops of 1P2W, or four loops of 3P3W/3P4W, or a hybrid combination, providing flexible application.

Each built-in power measurement module supports to monitor voltage, current, power, power factor, kWh and other information in real time. All information can be displayed sequentially on LED monitor by manual and communicated with monitoring device via Modbus.IPP series built-in three groups isolated PT and 12 sets of removable external isolated CT, supports the most secure way to indirectly measure branches of power information in the power distribution panel. IPP series is small and may be easily surface mounted on anywhere you prefer.  


IPP series provide CT clamps for installation on the monitored circuit. The installation could be executed under power-on status.IPP series provide CT clamps for installation on the monitored circuit. The installation could be executed under power-on status.

Hot line installation

12 measurement modules may be configured optionally as single-phase, three-phase power or a combination of hybrid.


The voltage range is 60V-440V (50 / 60Hz.); the current range is 0.5A-50A and maximum to 200A

Full Range

IPP series adopts U.S. high-precision industrial microprocessor with a ferroelectric memory (FRAM), being free from power outages and restriction of erase/write cycles. It is highly anti-noise and reliable on saving data.


IPP series adopts indirect measurement through PT and CT, isolated from measurement device. After installation all wiring and terminals are protected by terminal cover. IPP series also grants FCC & CE EMC certification.


IPP-B supports Modbus, integrated industrial communication system

Modbus Communication

There are 12 built-in measurement modules. Each module with independent and complete power measurement capabilities, provides real time measurement data.

Dedicated Loops Measurement

Each loop may measure single and three-phase of the real time voltage (V), current (A), power (W), power factor (PF) and the totalization of kWh, kVARh, kVAh.


Active power measurement shows 0.001kW-50kW; energy measurement displays 0.001kWh-99999kWh.

High Resolution

The accuracy rate of kWh measurement is within ±1.0% (@PF=1.0, Rated Current), and W, V, A, VA, PF within ±1.0% (@Rated Current).

High Precision

The power consumption of IPP series is less than 6W.

Low power consumption
Model List

1P2W/1P3W Power Monitor by Modbus


Intelligent power panel, 1P2W/1P3W, 10Ø CT x 12, RS485

3P3W Power Monitor by Modbus


Intelligent power panel, 3P3W, 10Ø CT x 12, RS485

3P4W Power Monitor by Modbus


Intelligent power panel, 3P4W, 10Ø CT x 12, RS485

Please reload