Digipower| Intelligent meter | Branch circuit monitor

Intelligent Power Panel - Power Meter via TCPIP/SNMP

IPP-M series is a single/three phase remotely monitored power meter, built-in 12 independent measurement modules. User may select any one phase of the input voltage as a measurement reference. It supports the monitoring of twelve loops of 1P2W, or four loops of 3P3W/3P4W, or a hybrid combination, providing flexible application.
Each built-in power measurement module supports to monitor voltage, current, power, power factor, kWh and other information in real time. All information can be displayed sequentially on LED monitor by manual and communicated with monitoring device via web browser. SNMP utility is free bundled in the IPP series.
IPP series built-in three groups isolated PT and 12 sets of removable external isolated CT, supports the most secure way to indirectly measure branches of power information in the power distribution panel. IPP series is small and may be easily surface mounted on anywhere you prefer.

Features

Cost saving for software installation

IPP series provides free central management utility to monitor group of IPP series, saving a lot time and cost to build up management system.

Hot line installation

IPP series provide CT clamps for installation on the monitored circuit. The installation could be executed under power-on status.IPP series provide CT clamps for installation on the monitored circuit. The installation could be executed under power-on status.

Flexibility

12 measurement modules may be configured optionally as single-phase, three-phase power or a combination of hybrid.

Full Range

The voltage range is 60V-440V (50 / 60Hz.); the current range is 0.5A-50A and maximum to 200A

Safety

IPP series adopts U.S. high-precision industrial microprocessor with a ferroelectric memory (FRAM), being free from power outages and restriction of erase/write cycles. It is highly anti-noise and reliable on saving data.

Remote Monitor

IPP series may remotely monitor power consumption Via TCP/IP and SNMP; it reads complete power information of each loop once a second.

Low power consumption

The power consumption of IPP series is less than 6W.

Various method to manage power information

User may monitor power consumption on web, utility and APP.

Dedicated Loops Measurement

There are 12 built-in measurement modules. Each module with independent and complete power measurement capabilities, provides real time measurement data.

Multi-functions

Each loop may measure single and three-phase of the real time voltage (V), current (A), power (W), power factor (PF) and the totalization of kWh, kVARh, kVAh.

High Resolution

Active power measurement shows 0.001kW-50kW; energy measurement displays 0.001kWh-99999kWh.

High Precision

The accuracy rate of kWh measurement is within ±1.0% (@PF=1.0, Rated Current), and W, V, A, VA, PF within ±1.0% (@Rated Current).

Reliability

IPP series adopts indirect measurement through PT and CT, isolated from measurement device. After installation all wiring and terminals are protected by terminal cover. IPP series also grants FCC & CE EMC certification.